BPM 723-DA maritime panel displays  
   
 
 
   
   

  Type Approved Maritime Display
  . . . 23.1" color TFT flat panel
  . . . 1600 x 1200 pixels (UXGA)
  . . . DVI and analog RGB inputs
  . . . DTC - Drift Tolerance Compensation
  . . . ECDIS / RADAR / EN 60945 conformity
 
   
Specifications:
  • 23.1" (590 mm) UXGA Data Display
  • Display area: 470.4 mm (H) x 352.8 mm (V) [18.52" x 13.88"]
  • Aspect ratio: 4:3 (Landscape format)
  • Drive system: a-Si TFT active matrix
  • Display color: 16.7 million colors, 256 gray values
  • Pixel: 1600 (H) x 1200 (V)
  • Pixel arrangement: RGB (Red dot, Green dot, Blue dot) vertical stripe
  • Dot pitch : 0.098 mm (H) x 0.294 mm (V) [0.0038" x 0.011"]
  • Pixel pitch: 0.294 mm (H) x 0.294 mm (V) [0.011" x 0.011"]
  • Contrast ratio: 600:1 (typ.)
  • Designed viewing direction: 85° Right, Left, Up and Down side (typ.)
  • Response time: Ton + Toff (10% - 90% - 10%) 30 ms (typ.)
  • Luminance: 250 cd/m2 at maximum IBL drive (typ.)
  • BayView AD5 DVI & analog RGB to 24-bit LVDS converter board
  • Analog RGB input: 162.5 MHz bandwidth, up to 100 kHz H-frequency, up to 200 Hz V-frequency (UXGA 60 Hz), H-sync.(+/-), V-sync. (+/-), Composite sync. on (G)reen and H-sync.
  • Picture position, phase and size recognition with automatic self-adjustment capabilities (auto-phase / auto-tracking)
  • Auto-scaling to maximum panel resolution (VGA, SVGA, XGA, SXGA up-scaling to 1600 x 1200 pixels)
  • On-Screen-Display (OSD) for user specific adjustments, like: intensity, contrast, color, backlight brightness, etc.
  • DTC - Drift Tolerance Compensation
  • Setup parameters are saved in non-volatile memory
  • Gamma correction tables, 8x8 bit for R, G and B each
  • DVI Interface, MOLEX socket connector
  • Analog RGB Input Interface (VGA standard), HD D-Sub socket connector
  • Active Analog RGB Loop Through Output Port (VGA standard), HD D-Sub socket connector, signals are amplified to standard RGBHV signal levels
  • Remote Control functions: Remote-OSD and Firmware updates using the RS232 port, D-Sub socket connector
  • Buzzer Interface, D-Sub socket connector (option)
  • Power input: integrated wide-range 85 to 264 VAC 50/60 Hz power supply (-AC), or integrated wide-range 24 VDC DC/DC converter (18 to 32 VDC) input voltage as option (-DC24)
  • Front bezel sided OSD keypad, Power Standby On/Off key, monitor operation status LED
  • From de full milled front bezel, saltwater-proofed Aluminum alloy with galvanic treatment
  • Front bezel finish color: black, RAL 9005
  • 2 mm (thickness) aluminum chassis, saltwater-proofed galvanic treatment
  • 8x M6 stand mounting thread holes (4x right, 4x left)
  • 3 mm anti-reflection mineral glass pane
  • Mechanically protected connectors area
  • Outside dimensions: 584 (W) x 534 (H) x 86 (D) mm [22.99" x 21.02" x 3.39"], 126 mm [4.96"] deep with front handles
  • Weight: ~ 12.5 kg [27.5 lbs]
  • Approvals and Designed to Meet Conformities:
    •   - ECDIS IEC 61174 (Edition 2, 2001)
      - IEC/EN 60945 (Edition 4, 2002)
      - EN 55011 Class A
      - EN 50081-1
      - EN 50082-1
     

Product Options:

  • Stands and mounting brackets
  • Sunvisor and water drop protectors
  • Alarm buzzer, EN60945 approved
  • Front handles (from outside mountable or removable)
  • Customer specific finish colors

Connectors:

  Power Input Euro AC line connector, DIN 49457 B (-AC); or 4-pins DC connector with filter and screw-lock, 2x 12 VDC, 2x Ground (-DC24)
  Remote OSD Interface 9-socket D-Sub connector; RS-232 (X-ON/X-OFF)
  Analog RGB Input Interface 15-socket HD D-Sub connector, HSync. / VSync.: TTL signal level; RGB signals: 700 mV p/p, 75 ohm asym.; end unit
  Analog RGB Output Port 15-socket HD D-Sub connector, HSync. / VSync.: TTL signal level; RGB signals: 700 mV p/p, 75 ohm asym.; end unit
  DVI Interface 26-socket MOLEX connector, differential DVI-I standard signals; end unit
  Buzzer Interface 9-socket D-Sub connector; Buzzer (+) / Buzzer (-)
 
   

 

BPM connectors area

  
   
   
Dimensions:  
   

 

BPM 723-DA Dimensions

  
   
   
Standard BPM 723-DA Displays:  
   
  Order # Product Name Mnemonics
  28-190-00-22 BPM 723-DA-AC
-DA = DVI & Analog RGB
-AC = Integrated wide-range power supply
-DC24 = Integrated wide-range DC/DC converter with nominal 24 VDC input
-BZ = Buzzer
-HG = Front Handles
 
Housing finish color:
xx-xxx-xx-02 = chromate surfaces (RoHs), black, RAL 9005
  28-190-05-22 BPM 723-DA-AC-HG
  28-191-00-22 BPM 723-DA-AC-BZ
  28-191-05-22 BPM 723-DA-AC-BZ-HG
  28-192-01-22 BPM 723-DA-DC24
  28-192-06-22 BPM 723-DA-DC24-HG
  28-193-01-22 BPM 723-DA-DC24-BZ
  28-193-06-22 BPM 723-DA-DC24-BZ-HG
       
  23-004-00-C-51 BPM 723-300 STAND IEC60495 aluminum stand
 
   
Additional information on request.  
   
   
Baytek reserves the right to modify the information contained herein as necessary and the customer should ensure that it has the most recent revision of the data sheet. Baytek makes no warranty for the use of its products and bears no responsibility for any errors which may appear in this document.  
   
ALL RIGHTS RESERVED  
   
Last update: 10-03-11  
© 1996 - 2011, Baytek Industriesysteme GmbH, Germany  
   
E-Mail: sales@baytek.de  
   
 
   
[BPM 719-DA] [BPM 720-DA] [BPM 721-DA] [BPM 722-DA] [BPM 726-DA] [BQM 817-DA]
[Overview] [BPM / BQM Panel Displays] [Tech. Update] [Trademarks] [PgUp]
  
   
Webmaster: heinrich.p@baytek.de