BQM 817-DA maritime panel displays  
   
 
 
   
   

  Type Approved* Maritime Display
  . . . 17.0" color TFT flat panel
  . . . 1280 x 1024 pixels (SXGA)
  . . . VGA to UXGA DVI & analog RGB input
  . . . DTC - Drift Tolerance Compensation
  . . . ECDIS / RADAR / EN 60945 conformity
 
   
Specifications:
  • 17.0" (432 mm) SXGA Data Display
  • Display area: 337.92 mm (H) x 270.336 mm (V) [13.304" x 10.643"]
  • Aspect ratio: 5:4 (Landscape format)
  • Drive system: a-Si TFT active matrix
  • Display color: 16.7 million colors, 256 gray values
  • Pixel: 1280 (H) x 1024 (V)
  • Pixel arrangement: RGB (Red dot, Green dot, Blue dot) vertical stripe
  • Dot pitch : 0.088 mm (H) x 0.264 mm (V) [0.0034" x 0.010"]
  • Pixel pitch: 0.264 mm (H) x 0.264 mm (V) [0.010" x 0.010"] 
  • Contrast ratio: 800:1 (typ.)
  • Designed viewing direction: 80° Right, Left, Up and Down side (typ.)
  • Response time: Ton + Toff (10% - 90% - 10%) 20 ms (typ.)
  • Luminance: 300 cd/m2 at maximum IBL drive (typ.)
  • BayView AD5 DVI & analog RGB to 24-bit LVDS converter board
  • Analog RGB input: 162.5 MHz bandwidth, up to 100 kHz H-frequency, up to 200 Hz V-frequency (UXGA 60 Hz), H-sync.(+/-), V-sync. (+/-), Composite sync. on (G)reen and H-sync.
  • Picture position, phase and size recognition with automatic self-adjustment capabilities (auto-phase / auto-tracking)
  • Auto-scaling to maximum panel resolution (VGA, SVGA, XGA, UXGA up-/down-scaling to 1280 x 1024 pixels)
  • On-Screen-Display (OSD) for user specific adjustments, like: intensity, contrast, color, backlight brightness, etc.
  • DTC - Drift Tolerance Compensation
  • Setup parameters are saved in non-volatile memory
  • Gamma correction tables, 8x8 bit for R, G and B each
  • DVI Interface, MOLEX socket connector
  • Analog RGB Input Interface (VGA standard), HD D-Sub socket connector
  • Remote Control functions: Remote-OSD and Firmware updates using the RS232 port, D-Sub socket connector
  • Touch Screen Interface, D-Sub socket connector
  • Power input: external universal power supply with 12 VDC output (-AC), or integrated wide-range DC/DC converters in three input voltage ranges: -DC12 (10 to 18 VDC, -DC24 (20 to 32 VDC)  and -DC48 (32 to 60 VDC)
  • Front bezel sided OSD keypad, Power Standby On/Off key, monitor operation status LED
  • From de full milled housing, saltwater-proofed Aluminum alloy with galvanic treatment
  • Housing finish color: black, RAL 9005
  • 4x M6 front side mounting holes
  • VESA-100 stand mounting M4 thread holes, additional 24x M4 rear side mounting thread holes
  • 3 mm anti-reflection mineral glass pane or analog-resistive Touch Screen sensor
  • Mechanically protected connectors area
  • Outside dimensions: 431 (W) x 378 (H) x 82 (D) mm [16.97" x 14.88" x 3.23"], 122 mm [4.80"] deep with front handles
  • Weight: t.b.d. kg [t.b.d. lbs]
  • Approvals and Designed to Meet Conformities:
    •   - ECDIS IEC 61174 (Edition 2, 2001)
      - IEC/EN 60945 (Edition 4, 2002)
      - EN 55011 Class A
      - EN 50081-1
      - EN 50082-1

(*) pending

 

Product Options:

  • Active RGB output, RGB loop through
  • IP65 protection level
  • Analog-resistive Touch Screen
  • Stands and mounting brackets
  • Front handles (from outside mountable or removable)
  • Customer specific finish colors

Connectors:

  Power Input 4-pins Binder DC connector (-DC12/-DC24/-DC48)
  Remote OSD Interface 9-socket D-Sub connector; RS-232 (X-ON/X-OFF)
  DVI Interface 26-socket MOLEX connector, differential PanelLink standard signals; end unit
  Analog RGB  Interface 15-socket HD D-Sub connector, HSync. / VSync.: TTL signal level; RGB signals: 700 mV p/p, 75 ohm asym.; end unit
  Touch Screen Interface 9-socket D-Sub connector; TxD, RxD, RTS and CTS; V24 / RS-232 Signals
 
   
   
Dimensions:  
   

 

BQM 817-DA Dimensions

  
   
   
Standard BQM 817-DA Displays:  
   
  Order # Product Name Mnemonics
  29-090-00-22 BQM 817-DA-AC
-DA = DVI & Analog RGB
-AC = external universal power supply with 12 VDC output
-DC12 = Integrated wide-range DC/DC converter with nominal 12 VDC input
-DC24 = Integrated wide-range DC/DC converter with nominal 24 VDC input
-DC48 = Integrated wide-range DC/DC converter with nominal 48 VDC input
-T = analog/resistive Touch Screen
-65 = entire IP65 protection level
 
Housing finish color:
xx-xxx-xx-02 = chromate surfaces (RoHs), black, RAL 9005
  29-090-05-22 BQM 817-DA-AC-65
  29-091-00-22 BQM 817-DA-AC-T
  29-091-05-22 BQM 817-DA-AC-T-65
  29-092-00-22 BQM 817-DA-DC12
  29-092-01-22 BQM 817-DA-DC24
  29-092-02-22 BQM 817-DA-DC48
  29-092-05-22 BQM 817-DA-DC12-65
  29-092-06-22 BQM 817-DA-DC24-65
  29-092-07-22 BQM 817-DA-DC48-65
  29-093-00-22 BQM 817-DA-DC12-T
  29-093-01-22 BQM 817-DA-DC24-T
  29-093-02-22 BQM 817-DA-DC48-T
  29-093-05-22 BQM 817-DA-DC12-T-65
  29-093-06-22 BQM 817-DA-DC24-T-65
  29-093-07-22 BQM 817-DA-DC48-T-65
       
  23-006-00-A-51 BQM 8XX-300 STAND IEC60495 aluminum stand
  23-030-00-A-51 DV FRONT HANDLES SET Front bezel handles set, 120 mm
 
   
Additional information on request.  
   
   
Baytek reserves the right to modify the information contained herein as necessary and the customer should ensure that it has the most recent revision of the data sheet. Baytek makes no warranty for the use of its products and bears no responsibility for any errors which may appear in this document.  
   
ALL RIGHTS RESERVED  
   
Last update: 11-03-11  
© 1996 - 2011, Baytek Industriesysteme GmbH, Germany  
   
E-Mail: sales@baytek.de  
   
 
   
[BPM 719-DA] [BPM 720-DA] [BPM 721-DA] [BPM 722-DA] [BPM 723-DA] [BPM 726-DA]
[Overview] [BPM / BQM Panel Displays] [Tech. Update] [Trademarks] [PgUp]
  
   
Webmaster: heinrich.p@baytek.de