BQR 1020-DM, 20.1" Rugged LCD Display (DVI / analog RGB and Video)

BQR 1020-DM rugged defense panel displays (-on request-)

			Rugged Panel Display for Naval Applications
			. . . 20.1" color TFT flat panel
			. . . 1600 x 1200 pixels (UXGA)
			. . . Analog RGB input (DVI-D as option)
			. . . CVBS and S-Video inputs
			. . . MIL-STD, FCC-B, EN 61000, CE, Nema4

Specifications:

20.1" (510 mm) UXGA Data and Video Display
Display area: 408 mm (H) x 306 mm (V)
Aspect ratio: 4:3 (Landscape format)
Drive system: a-Si TFT active matrix
Display color: 16.7 million colors, 256 gray values
Pixel: 1600 (H) x 1200 (V)
Pixel arrangement: RGB (Red dot, Green dot, Blue dot) vertical stripe
Dot pitch : 0.085 mm (H) x 0.255 mm (V)
Pixel pitch: 0.255 mm (H) x 0.255 mm (V)
Contrast ratio: 350:1 (typ.)
Designed viewing direction: 85° Right, Left, Up and Down side (typ.)
Response time: Ton + Toff (10% - 90% - 10%) 25 ms (typ.)
Luminance: 200 cd/m2 at maximum IBL drive (typ.)
BayView AVD6 DVI / analog RGB / Video to 24-bit LVDS converter board
Analog RGB input: 162.5 MHz bandwidth, up to 100 kHz H-frequency, up to 200 Hz V-frequency (UXGA 60 Hz), H-sync.(+/-), V-sync. (+/-), Composite sync. on (G)reen and H-sync.
Standard CVBS (Composite) and S-Video (Y/C) video inputs
NTSC-M/N/4.43, PAL-M/N/B/G/H/I/D/K/L formats with auto-detection logic
Picture position, phase and size recognition with automatic self-adjustment capabilities (auto-phase / auto-tracking)
Auto-scaling to maximum panel resolution (VGA, SVGA, XGA, SXGA, PAL, NTSC, up-scaling to 1600 x 1200 pixels)
On-Screen-Display (OSD) for user specific adjustments, like: intensity, contrast, color, backlight brightness, etc.
Setup parameters are saved in non-volatile memory
Gamma correction tables, 8x8 bit for R, G and B each
High performance de-interlacer for interlace to non-interlace movement artifacts suppression
Analog RGB Interface (VGA standard), Amphenol circular connector (X3)
3x CVBS or 1x S-Video + 1x CVBS video inputs, Amphenol circular connector (X4)
Remote Control functions: Remote-OSD and Firmware updates using the RS232 port, Amphenol circular connector (X1)
Power input: integrated wide-range 90 to 264 VAC 50/60 Hz power supply (-AC), or integrated wide-range DC/DC converter with 24 VDC (18 to 32 VDC) input voltage (-DC28), Amphenol circular connector (PI)
Microprocessor controlled voltages monitor with LED alarm (STATUS + POWER LED´s)
Microprocessor controlled heating and cooling functions, temperature monitor with LED alarm
Front bezel sided OSD keypad, Power Standby On/Off key, monitor operation status LED's
OSD Menu controlled LED brightness (red STATUS LED, amber HEATING LED and green POWER LED) and OSD keypad function LED's (amber)
Photo sensor controlled LCD-Backlight brightness, OSD controlled functionality (ON/OFF and brightness offset)
From de full milled housing, saltwater-proofed Aluminum alloy with galvanic treatment
Housing finish color: black, RAL 9005
VESA 100 mounting (4x M4x8 thread holes), additional M4x8 thread holes at the rear upper and bottom side (8x)
5 mm anti-reflection mashed mineral glass pane
Mechanically protected connectors area
Full IP65/NEMA4 and Drip Proof conformity
Conformities: MIL-STD, FCC-B, EN 61000, CE
The 19" Rack/Console front bezel (-19) are delivered wit front handles. The handles can be removed without housing opening (4x M5 thread holes)
Outside dimensions: 449 (W) x 379 (H) x 97 (D) [mm] for the standard front bezel (-ST), 483 (W) x 399.2 (H) x 142 (D) [mm] for the 19" (9U), 102 mm deep without front handles (-19)
Weight: ~ 14.5 kg

BQR Human Interface

Customer Specific Options:

DVI Interface, Amphenol circular connector (X5)
Analog RGB output (loop-through) circular connector (X4)
One and two axis VESA 100 stands
Touch Screen
Customer specific connectors
Customer specific finish colors

Connectors:

	Grounding Point (GP)	M6 thread bolt
	Power Input (PI)	6-pin Amphenol LJT00RT-11-05PA014 circular connector (-AC), or 6-pin Amphenol LJT00RT-11-04P014 circular connector (-DC28)
	Remote OSD Interface (X1)	10-pin Amphenol LJT00RT-13-98P014 circular connector; RS-232 (X-ON/X-OFF)
	Analog RGB Interface (X2)	5-pin Amphenol LJT00RT-15-05P014 circular connector (coaxial), HSync. / VSync.: TTL signal level; RGB signals: 700 mV p/p, 75 ohm asym.; end unit
	Video Inputs (X3)	5-pin Amphenol LJT00RT-15-05P014 circular connector (coaxial),; 3x CVBS (Composite) or 1x CVBS + 1x S-Video (Y/C) video inputs; end unit
	Analog RGB Output (X4) OPTION	5-pin Amphenol LJT00RT-15-05P014 circular connector (coaxial), HSync. / VSync.: TTL signal level; RGB signals: 700 mV p/p, 75 ohm asym.; one unit load
	DVI Interface (X5) OPTION	22-pin Amphenol LJT00RT-13-35P014 circular connector, differential DVI standard signals; end unit

BQR -DM Connectors Area

Dimensions:

BQR 1020-DM-19 Dimensions

Standard BQR 1020-DM Displays:

Order #	Product Name	Mnemonics
27-645-00-02	BQR 1020-DM-ST-AC	-DM = DVI, Analog RGB and Video Inputs -ST = compact stand-alone front bezel -19 = 19" (9U) rack / console front bezel -AC = Integrated wide-range power supply -DC28 = Integrated wide-range DC/DC converter with nominal 28 VDC input voltage Housing finish color: xx-xxx-xx-02 = chromated surfaces (RoHs), black, RAL 9005
27-645-05-02	BQR 1020-DM-19-AC
27-647-01-02	BQR 1020-DM-ST-DC28
27-647-06-02	BQR 1020-DM-19-DC28

Additional information on request.

Baytek reserves the right to modify the information contained herein as necessary and the customer should ensure that it has the most recent revision of the data sheet. Baytek makes no warranty for the use of its products and bears no responsibility for any errors which may appear in this document.

Last update: 15-11-11

E-Mail: sales@baytek.de

[BQR 1019-DM] [BQR 1021-DM] [BQR Panel Displays] [Overview]
[Tech. Update] [Trademarks] [PgUp]

Webmaster: heinrich.p@baytek.de