• 310 mm (12.1") SVGA Data Display
• Display area: 246.0 mm (H) x 184.5 mm (V)
• Aspect ratio: 4:3 (Landscape format)
• Drive system: a-Si TFT active matrix
• Display color: 262,144 colors, 64 gray values
• Pixel: 800 (H) x 600 (V)
• Pixel arrangement: RGB (Red dot, Green dot, Blue dot) vertical stripe
• Dot pitch : 0.1025 mm (H) x 0.3075 mm (V)
• Pixel pitch: 0.3075 mm (H) x 0.3075 mm (V)    
• Contrast ratio: 600:1 (typical)
• Designed viewing direction: 70° Right, Left and 60° Up and Down side (typ.)
• Response time: Ton + Toff (10% - 90% - 10%) 35 ms (typ.)
• Luminance: 450 cd/m2 at maximum IBL drive (typ.)
• BayView AD6 DVI and analog RGB to 24-bit LVDS converter board
• Analog RGB input: 162.5 MHz bandwidth, up to 100 kHz H-frequency, up to 200 Hz V-frequency (UXGA 60 Hz), H-sync.(+/-), V-sync. (+/-), Composite sync. on (G)reen and H-sync.
• Picture position, phase and size recognition with automatic self-adjustment capabilities (auto-phase / auto-tracking)
• Auto-scaling to maximum panel resolution (VGA, XGA, SXGA, UXGA up- / down-scaling to 800 x 600 pixels)
• On-Screen-Display (OSD) for user specific adjustments, like: intensity, contrast, color, backlight brightness, etc.
• Setup parameters are saved in non-volatile memory
• Gamma correction tables, 8x8 bit for R, G and B each
• DB15 connector (HD D-SUB) for analog RGB input (analog VGA standard connector)
• DB9 connector (D-SUB) for Remote Control functions: Remote-OSD and Firmware updates using the RS232 port
• Rear side placed OSD keypad
• Milled aluminum front plate (10 mm thick) in following variants:

• 3 mm anti-reflection mineral glass pane or 3 mm touch screen sensor pane
• Robust aluminum chassis, 335 x 240 x 60 mm (WxHxD)
• Mechanically protected connectors area
• Euro line connector with integrated power ON/OFF switch and line filter
• AC-Line input: 85 to 264 VAC 50/60 Hz (integrated universal power supply)
• Dimensions with -ST / -DE / -V2A front plates: 350 (w) x 270 (h) x 70 (d) [mm], with -19 front plate: 483 (w) x 266 (h) x 70 (d) [mm]
• Conformities: IP20 (IP65 front plate / IP20 chassis), EN55011 Class A, FCC Class A, EN50081-1, EN50082-2, EN61000-4, UL1950 / EN60555 / EN60950 AM1, AM2, AM3

Product alternatives and Options:

• DVI Interface with 26-socket Molex DVI-I connector, 2 meter DVI data cable
• DC-power input: integrated DC-DC converter with 12 VDC (10 to 18 VDC), 24 VDC (18 to 36 VDC) or 48 VDC (36 to 72 VDC) input voltage (-DC12, -DC24 or -DC48)
• Analog resistive touch screen (-T)
• 6 mm bulletproof mineral glass pane (-P)
• Housing handles set (for -19 front bezel variants)

Connectors:

[BayPanel 608-DA] [BayPanel 610-DA] [BayPanel 615-DA] [BayPanel 717-DA] [BayPanel 719-DA]

[BayPanel 820-DA] [BayPanel 821-DA]

[Tech. Update] [Trademarks]

[Overview] [BayPanel Monitors] [PgUp]