|
|
 |
Stand-Alone / Automotive Video- / Data- Monitor | |
|
. . . 10.4" color TFT flat panel | ||
|
. . . 1024 x 768 pixels (XGA) | ||
|
. . . Analog RGB input | ||
|
. . . CVBS and S-Video inputs | ||
|
. . . Full resolution NTSC / PAL |
- 263 mm (10.4") XGA Data and Video Display
- Display area: 210.4 mm (H) x 157.8 mm (V)
- Aspect ratio: 4:3 (Landscape format)
- Drive system: a-Si TFT active matrix
- Display color: 262,144 colors, 64 gray values
- Pixel: 1024 (H) x 768 (V)
- Pixel arrangement: RGB (Red dot, Green dot, Blue dot) vertical stripe
- Dot pitch : 0.0685 mm (H) x 0.2055 mm (V)
- Pixel pitch: 0.2055 mm (H) x 0.2055 mm (V)
- Contrast ratio: 300:1 (typical)
- Designed viewing direction: 60° Right / Left, 45° Up and 60° Down side (typ.)
- Response time: Ton + Toff (10% - 90% - 10%) 33 ms (typ.)
- Luminance: 300 cd/m2 at maximum IBL drive (typ.)
- BayView AVD6 DVI / analog RGB / Video to 24-bit LVDS converter board
- Analog RGB input: 162.5 MHz bandwidth, up to 100 kHz H-frequency, up to 200 Hz V-frequency (UXGA 60 Hz), H-sync.(+/-), V-sync. (+/-), Composite sync. on (G)reen and H-sync.
- Standard CVBS (Composite) and S-Video (Y/C) video inputs
- NTSC-M/N/4.43, PAL-M/N/B/G/H/I/D/K/L formats with auto-detection logic
- Picture position, phase and size recognition with automatic self-adjustment capabilities (auto-phase / auto-tracking)
- Auto-scaling to maximum panel resolution (VGA, SVGA, SXGA, UXGA, PAL, up- / down-scaling to 1024 x 768 pixels)
- On-Screen-Display (OSD) for user specific adjustments, like: intensity, contrast, color, backlight brightness, etc.
- Setup parameters are saved in non-volatile memory
- Gamma correction tables, 8x8 bit for R, G and B each
- High performance de-interlacer for interlace to non-interlace movement artifacts suppression
- DB15 connector (HD DSUB) for analog RGB input (analog VGA standard connector)
- 3x BNC connectors, configurable as follows: 3x CVBS, or 1x S-Video + 1x CVBS
- DB9 connector (DSUB) for Remote Control functions: Remote-OSD and Firmware updates using the RS232 port
- Rear side placed OSD keypad
- From de full milled aluminum housing
- Housing finish color: black, RAL 9005
- VESA-100 mounting (4x M4x8 thread holes), additional M4x8 thread holes at the rear upper and bottom side (8x)
- 3 mm anti-reflection mineral glass pane
- Mechanically protected connectors area
- AC-Power input: external 90 to 264 VAC 50/60 Hz universal power supply with 12 VDC output voltage
- Dimensions: 269 (W) x 215 (H) x 59 (D) [mm]
- Conformities: IP42, EN55011 Class A, FCC Class A, EN50081-1, EN50082-2, EN61000-4, external power supply: UL1950 / EN60950 AM1, AM2, AM3
Product Options:
- DVI Interface with 26-socket Molex DVI-I connector, 2 meter DVI data cable
- DC-power input: integrated DC-DC converter with 12 VDC (10 to 18 VDC), 24 VDC (18 to 36 VDC) or 48 VDC (36 to 72 VDC) input voltage (-DC12, -DC24 or -DC48), factory mounted option
- All around IP65 / NEMA4 option (-65)
- One and two axis VESA-100 stands
Connectors:
| DC Power Input | 4-pins Binder 680 series DC connector with filter and screw-lock, 2x 12 VDC, 2x Ground | |
| Analog RGB Interface | 15-pins HD DSUB connector, 2 meter data cable length, HSync. / VSync.: TTL signal level; RGB signals: 700 mV p/p, 75 ohm asym. | |
| Video Inputs | 3x BNC Connectors, 3x CVBS (Composite) or 1x CVBS + 1x S-Video (Y/C) Video Inputs | |
| Remote OSD Control | 9-pins DSUB connector, TxD and RxD V24 / RS-232 signals |
BayQad 610-XDM
| Order # | Product Name | Mnemonics |
| 24-615-00-02 | BayQad 610-XDM-AC |
(*) DVI is available as OEM / VAR factory option
|
| 24-615-05-02 | BayQad 610-XDM-AC-65 | |
| 24-617-00-02 | BayQad 610-XDM-DC12 | |
| 24-617-01-02 | BayQad 610-XDM-DC24 | |
| 24-617-02-02 | BayQad 610-XDM-DC48 | |
| 24-617-05-02 | BayQad 610-XDM-DC12-65 | |
| 24-617-06-02 | BayQad 610-XDM-DC24-65 | |
| 24-617-07-02 | BayQad 610-XDM-DC48-65 |
Datasheets Download:
BayQad
610-XDM-AC |
BayQad
610-XDM-DC |
|
BayQad
610-XDM-65-AC |
BayQad
610-XDM-65-DC |