BayQad 612-DM rugged stand-alone panel monitors  
   
 
   
 
 
   
   

 

   Stand-Alone / Automotive  Video- / Data- Monitor
  . . . 12.1" color TFT flat panel
  . . . 800 x 600 pixels (SVGA)
  . . . Analog RGB input
  . . . CVBS and S-Video inputs
  . . . Full resolution NTSC/PAL
 
   
Specifications:
  • 310 mm (12.1") SVGA Data and Video Display
  • Display area: 246.0 mm (H) x 184.5 mm (V)
  • Aspect ratio: 4:3 (Landscape format)
  • Drive system: a-Si TFT active matrix
  • Display color: 262,144 colors, 64 gray values
  • Pixel: 800 (H) x 600 (V)
  • Pixel arrangement: RGB (Red dot, Green dot, Blue dot) vertical stripe
  • Dot pitch : 0.1025 mm (H) x 0.3075 mm (V)
  • Pixel pitch: 0.3075 mm (H) x 0.3075 mm (V)    
  • Contrast ratio: 600:1 (typical)
  • Designed viewing direction: 70° Right, Left and 60° Up and Down side (typ.)
  • Response time: Ton + Toff (10% - 90% - 10%) 35 ms (typ.)
  • Luminance: 450 cd/m2 at maximum IBL drive (typ.)
  • BayView AVD6 DVI / analog RGB / Video to 24-bit LVDS converter board
  • Analog RGB input: 162.5 MHz bandwidth, up to 100 kHz H-frequency, up to 200 Hz V-frequency (UXGA 60 Hz), H-sync.(+/-), V-sync. (+/-), Composite sync. on (G)reen and H-sync.
  • Standard CVBS (Composite) and S-Video (Y/C) video inputs
  • NTSC-M/N/4.43, PAL-M/N/B/G/H/I/D/K/L formats with auto-detection logic
  • Picture position, phase and size recognition with automatic self-adjustment capabilities (auto-phase / auto-tracking)
  • Auto-scaling to maximum panel resolution (VGA, XGA, SXGA, UXGA, PAL, up- / down-scaling to 800 x 600 pixels)
  • On-Screen-Display (OSD) for user specific adjustments, like: intensity, contrast, color, backlight brightness, etc.
  • Setup parameters are saved in non-volatile memory
  • Gamma correction tables, 8x8 bit for R, G and B each
  • High performance de-interlacer for interlace to non-interlace movement artifacts suppression
  • DB15 connector (HD DSUB) for analog RGB input (analog VGA standard connector)
  • 3x BNC connectors, configurable as follows: 3x CVBS, or 1x S-Video + 1x CVBS
  • DB9 connector (DSUB) for Remote Control functions: Remote-OSD and Firmware updates using the RS232 port
  • Rear side placed OSD keypad
  • From de full milled aluminum housing
  • Housing finish color: black, RAL 9005
  • VESA-100 mounting (4x M4x8 thread holes), additional M4x8 thread holes at the rear upper and bottom side (8x)
  • 3 mm anti-reflection mineral glass pane or 3 mm touch screen sensor pane
  • Mechanically protected connectors area
  • AC-Power input: external 90 to 264 VAC 50/60 Hz universal power supply with 12 VDC output voltage
  • Dimensions: 311 (W) x 234.8 (H) x 59 (D) [mm]
  • Conformities: IP42, EN55011 Class A, FCC Class A, EN50081-1, EN50082-2, EN61000-4, external power supply: UL1950 / EN60950 AM1, AM2, AM3

Product Options:

  • DVI Interface with 26-socket Molex DVI-I connector, 2 meter DVI data cable
  • DC-power input: integrated DC-DC converter with 12 VDC (10 to 18 VDC), 24 VDC (18 to 36 VDC) or 48 VDC (36 to 72 VDC) input voltage (-DC12, -DC24 or -DC48), factory mounted option
  • Analog resistive touch screen (-T)
  • One and two axis VESA-100 stands

Connectors:

  DC Power Input 4-pins Binder 680 series DC connector with filter and screw-lock, 2x 12 VDC, 2x Ground
  Analog RGB Interface 15-pins HD DSUB connector, 2 meter data cable length, HSync. / VSync.: TTL signal level; RGB signals: 700 mV p/p, 75 ohm asym.
  Video Inputs 3x BNC Connectors, 3x CVBS (Composite) or 1x CVBS + 1x S-Video (Y/C) Video Inputs
  Remote OSD Control 9-pins DSUB connector, TxD and RxD V24 / RS-232 signals
  Touch Screen Interface 9-socket DSUB connector, TxD, RxD, RTS and CTS, V24 / RS-232 Signals, 2.5 meter connection cable
 
   

 

(BayQad 615-DM-T connectors area, BayQad 612-DM-T picture not available yet)

  
   
   
Standard BayQad 612-DM Monitors and Options:  
   
Order # Product Name Mnemonics
24-620-00-02 BayQad 612-DM-AC
-DM = DVI(*) / analog RGB and video
-AC = External Power Supply with 12 VDC output
-DC12 = Integrated DC-DC Converter with nominal 12 VDC input voltage
-DC24 = Integrated DC-DC Converter with nominal 24 VDC input voltage
-DC48 = Integrated DC-DC Converter with nominal 48 VDC input voltage
  • -T = Touch Screen

    • (*) DVI is available as OEM / VAR factory option

    Housing finish color:
    xx-xxx-xx-02 = black, RAL 9005
    24-621-00-02 BayQad 612-DM-AC-T
    24-622-00-02 BayQad 612-DM-DC12
    24-622-01-02 BayQad 612-DM-DC24
    24-622-02-02 BayQad 612-DM-DC48
    24-623-05-02 BayQad 612-DM-DC12-T
    24-623-06-02 BayQad 612-DM-DC24-T
    24-623-07-02 BayQad 612-DM-DC48-T
    		 
       
       
    Datasheets Download:  
       
    BayQad 612-DM-AC BayQad 612-DM-DC
    		 
       
       
    Baytek reserves the right to modify the information contained herein as necessary and the customer should ensure that it has the most recent revision of the data sheet. Baytek makes no warranty for the use of its products and bears no responsibility for any errors which may appear in this document.  
       
    ALL RIGHTS RESERVED  
       
    Last update: 03-03-11  
    © 1996 - 2011, Baytek Industriesysteme GmbH, Germany  
       
    E-Mail: sales@baytek.de  
       
     
       
    [BayQad 708-DM] [BayQad 610-XDM] [BayQad 612-XDM] [BayQad 615-DM]
    [BayQad 7154-DM] [BayQad 717-DM] [BayQad 919-DM] [BayQad 920-DM] [BayQad 921-DM]
    [Tech. Update] [Trademarks]
    [Overview] [BayQad Panel Monitors] [PgUp]
    		  
       
    Webmaster: heinrich.p@baytek.de