|
|
 |
Stand-Alone / Automotive Data Monitor | |
|
. . . 15.0" color TFT flat panel | ||
|
. . . 1024 x 768 pixels (XGA) | ||
|
. . . Analog RGB input | ||
|
. . . Anti-reflection front glass | ||
|
. . . Touch Screen option |
- 380 mm (15") XGA Data Display
- Display area: 304.1 mm (H) x 228.1 mm (V)
- Aspect ratio: 4:3 (Landscape format)
- Drive system: a-Si TFT active matrix
- Display color: 16.2 million colors, 256 gray values
- Pixel: 1024 (H) x 768 (V)
- Pixel arrangement: RGB (Red dot, Green dot, Blue dot) vertical stripe
- Dot pitch : 0.099 mm (H) x 0.297 mm (V)
- Pixel pitch: 0.297 mm (H) x 0.297 mm (V)
- Contrast ratio: 400:1 (typ.)
- Designed viewing direction: 85° Right, Left, Up and Down side (typ.)
- Response time: Ton + Toff (10% - 90% - 10%) 25 ms (typ.)
- Luminance: 250 cd/m2 at maximum IBL drive (typ.)
- BayView AD6 DVI and analog RGB to 24-bit LVDS converter board
- Analog RGB input: 162.5 MHz bandwidth, up to 100 kHz H-frequency, up to 200 Hz V-frequency (UXGA 60 Hz), H-sync.(+/-), V-sync. (+/-), Composite sync. on (G)reen and H-sync.
- Picture position, phase and size recognition with automatic self-adjustment capabilities (auto-phase / auto-tracking)
- Auto-scaling to maximum panel resolution (VGA, SVGA, SXGA, UXGA up- / down-scaling to 1024 x 768 pixels)
- On-Screen-Display (OSD) for user specific adjustments, like: intensity, contrast, color, backlight brightness, etc.
- Setup parameters are saved in non-volatile memory
- Gamma correction tables, 8x8 bit for R, G and B each
- DB15 connector (HD DSUB) for analog RGB input (analog VGA standard connector)
- DB9 connector (DSUB) for Remote Control functions: Remote-OSD and Firmware updates using the RS232 port
- Rear side placed OSD keypad
- From de full milled aluminum housing
- Housing finish color: black, RAL 9005
- VESA-100 mounting (4x M4x8 thread holes), additional M4x8 thread holes at the rear upper and bottom side (8x)
- 3 mm anti-reflection mineral glass pane or 3 mm touch screen sensor pane
- Mechanically protected connectors area
- AC-Power input: external 90 to 264 VAC 50/60 Hz universal power supply with 12 VDC output voltage
- Dimensions: 360 (W) x 283.8 (H) x 59 (D) [mm]
- Conformities: IP42, EN55011 Class A, FCC Class A, EN50081-1, EN50082-2, EN61000-4, external power supply: UL1950 / EN60950 AM1, AM2, AM3
Product Options:
- DVI Interface with 26-socket Molex DVI-I connector, 2 meter DVI data cable
- DC-power input: integrated DC-DC converter with 12 VDC (10 to 18 VDC), 24 VDC (18 to 36 VDC) or 48 VDC (36 to 72 VDC) input voltage (-DC12, -DC24 or -DC48), factory mounted option
- Analog resistive touch screen (-T)
- One and two axis VESA-100 stands
Connectors:
| DC Power Input | 4-pins Binder 680 series DC connector with filter and screw-lock, 2x 12 VDC, 2x Ground | |
| Analog RGB Interface | 15-pins HD DSUB connector, 2 meter data cable length, HSync. / VSync.: TTL signal level; RGB signals: 700 mV p/p, 75 ohm asym. | |
| Remote OSD Control | 9-pins DSUB connector, TxD and RxD V24 / RS-232 signals | |
| Touch Screen Interface | 9-socket DSUB connector, TxD, RxD, RTS and CTS, V24 / RS-232 Signals, 2.5 meter connection cable |
BayQad 615-DA
| Order # | Product Name | Mnemonics |
| 24-530-00-02 | BayQad 615-DA-AC |
(*) DVI is available as OEM / VAR factory option
|
| 24-531-00-02 | BayQad 615-DA-AC-T | |
| 24-532-00-02 | BayQad 615-DA-DC12 | |
| 24-532-01-02 | BayQad 615-DA-DC24 | |
| 24-532-02-02 | BayQad 615-DA-DC48 | |
| 24-533-05-02 | BayQad 615-DA-DC12-T | |
| 24-533-06-02 | BayQad 615-DA-DC24-T | |
| 24-533-07-02 | BayQad 615-DA-DC48-T |
Datasheets Download:
|
