BayQad 7154-DM rugged stand-alone panel monitors  
   
 
   
 
 
   
   

 

  Stand-Alone / Automotive  Video- / Data- Monitor
  . . . 15.4" color TFT flat panel
  . . . 1280 x 1024 pixels (SXGA)
  . . . DVI and analog RGB input
  . . . CVBS and S-Video inputs
  . . . Full resolution NTSC/PAL
 
   
Specifications:
  • 15.4" (391 mm) SXGA Data & Video Display
  • Display area: 305.28 mm (H) x 244.224 mm (V)
  • Aspect ratio: 5:4 (Landscape format)
  • Drive system: a-Si TFT active matrix
  • Display color: 16.2 million colors, 256 gray values
  • Pixel: 1280 (H) x 1024 (V)
  • Pixel arrangement: RGB (Red dot, Green dot, Blue dot) vertical stripe
  • Dot pitch : 0.0795 mm (H) x 0.2385 mm (V)
  • Pixel pitch: 0.2385 mm (H) x 0.2385 mm (V)  
  • Contrast ratio: 250:1 (typ.)
  • Designed viewing direction: 70° Right and Left, 50° Up and Down side (typ.)
  • Response time: from 90% white to 10% black, 6 ms (typ.)
  • Luminance: 240 cd/m2 at maximum IBL drive (typ.)
  • BayView AVD5 DVI / analog RGB / Video to 24-bit LVDS converter board
  • Analog RGB input: 162.5 MHz bandwidth, up to 100 kHz H-frequency, up to 200 Hz V-frequency (UXGA 60 Hz), H-sync.(+/-), V-sync. (+/-), Composite sync. on (G)reen and H-sync.
  • Standard CVBS (Composite) and S-Video (Y/C) video inputs
  • NTSC-M/N/4.43, PAL-M/N/B/G/H/I/D/K/L formats with auto-detection logic
  • Picture position, phase and size recognition with automatic self-adjustment capabilities (auto-phase / auto-tracking)
  • Auto-scaling to maximum panel resolution (VGA, SVGA, XGA, UXGA, PAL, up- / down-scaling to 1280 x 1024 pixels)
  • On-Screen-Display (OSD) for user specific adjustments, like: intensity, contrast, color, backlight brightness, etc.
  • Setup parameters are saved in non-volatile memory
  • Gamma correction tables, 8x8 bit for R, G and B each
  • High performance de-interlacer for interlace to non-interlace movement artifacts suppression
  • 26-socket DVI-D Molex connector as DVI input
  • DB15 connector (HD DSUB) for analog RGB input (analog VGA standard connector)
  • 3x BNC connectors, configurable as follows: 3x CVBS, or 1x S-Video + 1x CVBS
  • DB9 connector (DSUB) for Remote Control functions: Remote-OSD and Firmware updates using the RS232 port
  • Rear side placed OSD keypad
  • From de full milled aluminum housing
  • Housing finish color: black, RAL 9005
  • VESA-100 mounting (4x M4x8 thread holes), additional M4x8 thread holes at the rear upper and bottom side (8x)
  • 3 mm anti-reflection mineral glass pane
  • Mechanically protected connectors area
  • AC-Power input: external 90 to 264 VAC 50/60 Hz universal power supply with 12 VDC output voltage
  • Dimensions: 362 (W) x 300 (H) x 79 (D) [mm]
  • Conformities: IP42, EN55011 Class A, FCC Class A, EN50081-1, EN50082-2, EN61000-4, external power supply: UL1950 / EN60950 AM1, AM2, AM3

Product Options:

  • Active RGB output, RGB loop through
  • DC-power input: integrated DC-DC converter with 12 VDC (10 to 18 VDC), 24 VDC (18 to 36 VDC) or 48 VDC (36 to 72 VDC) input voltage (-DC12, -DC24 or -DC48), factory mounted option
  • All around IP65 / NEMA4 option (-65)
  • One and two axis VESA-100 stands

Connectors:

  DC Power Input 4-pins Binder 680 series DC connector with filter and screw-lock, 2x 12 VDC, 2x Ground
  DVI Interface 26-socket MOLEX connector, differential PanelLink standard signals; end unit
  Analog RGB Interface 15-pins HD DSUB connector, 2 meter data cable length, HSync. / VSync.: TTL signal level; RGB signals: 700 mV p/p, 75 ohm asym.
  Video Inputs 3x BNC Connectors, 3x CVBS (Composite) or 1x CVBS + 1x S-Video (Y/C) Video Inputs
  Remote OSD Control 9-pins DSUB connector, TxD and RxD V24 / RS-232 signals
 
   

 

BayQad 7154-M (BayQad 7154-DM picture not available yet)

 
   
BayQad 7154-DM Dimensions:  
   
 
   
Standard BayQad 7154-DM Monitors and Options:  
   
Order # Product Name Mnemonics
24-655-00-02 BayQad 7154-DM-AC
-DM = DVI, analog RGB and Video
-AC = External Power Supply  with 12 VDC output
-DC12 = Integrated DC-DC Converter with nominal 12 VDC input voltage
-DC24 = Integrated DC-DC Converter with nominal 24 VDC input voltage
-DC48 = Integrated DC-DC Converter with nominal 48 VDC input voltage
-65 = IP65 / NEMA4 option
 
Housing finish color:
xx-xxx-xx-02 = black, RAL 9005
24-655-05-02 BayQad 7154-DM-AC-65
24-657-00-02 BayQad 7154-DM-DC12
24-657-01-02 BayQad 7154-DM-DC24
24-657-02-02 BayQad 7154-DM-DC48
24-657-05-02 BayQad 7154-DM-DC12-65
24-657-06-02 BayQad 7154-DM-DC24-65
24-657-07-02 BayQad 7154-DM-DC48-65
 
   
   
Datasheets Download:  
   
BayQad 7154-DM-AC BayQad 7154-DM-DC
BayQad 7154-DM-AC-65 BayQad 7154-DM-DC-65
 
   
   
Baytek reserves the right to modify the information contained herein as necessary and the customer should ensure that it has the most recent revision of the data sheet. Baytek makes no warranty for the use of its products and bears no responsibility for any errors which may appear in this document.  
   
ALL RIGHTS RESERVED  
   
Last update: 03-03-11  
© 1996 - 2011, Baytek Industriesysteme GmbH, Germany  
   
E-Mail: sales@baytek.de  
   
 
   
[BayQad 708-DM] [BayQad 610-XDM] [BayQad 612-DM] [BayQad 612-XDM]
[BayQad 615-DM] [BayQad 717-DM] [BayQad 919-DM] [BayQad 920-DM] [BayQad 921-DM]
[Tech. Update] [Trademarks]
[Overview] [BayQad Panel Monitors] [PgUp]
 
   
Webmaster: heinrich.p@baytek.de