Specifications:
- 20.1" (510 mm)
UXGA Data Display
- Display area: 408 mm (H) x 306 mm (V)
-
Aspect ratio: 4:3 (Landscape format)
- Drive system:
a-Si TFT active matrix
- Display
color: 16.7
million colors, 256 gray values
- Pixel: 1600 (H) x 1200 (V)
- Pixel
arrangement: RGB (Red dot, Green dot, Blue dot) vertical stripe
-
Dot pitch : 0.085 mm (H) x 0.255 mm (V)
-
Pixel pitch: 0.255 mm (H) x 0.255 mm (V)
- Contrast
ratio: 350:1 (typ.)
- Designed
viewing direction:
85° Right, Left, Up and Down side (typ.)
-
Response time:
Ton + Toff (10%
- 90% - 10%) 25 ms (typ.)
- Luminance:
200 cd/m2 at maximum IBL drive (typ.)
- BayView
AD5 DVI and analog RGB
to 24-bit LVDS converter board
- Analog
RGB input: 162.5 MHz bandwidth, up to 100 kHz
H-frequency, up to 200 Hz V-frequency (UXGA 60
Hz), H-sync.(+/-), V-sync. (+/-), Composite sync.
on (G)reen and H-sync.
- Picture
position, phase and size recognition with
automatic self-adjustment capabilities
(auto-phase / auto-tracking)
- Auto-scaling
to maximum panel resolution (VGA, SVGA, XGA, SXGA up-scaling to 1600
x 1200 pixels)
-
On-Screen-Display
(OSD) for user specific adjustments, like:
intensity, contrast, color, backlight brightness,
etc.
- Setup
parameters are saved in non-volatile memory
- Gamma
correction tables, 8x8 bit for R, G and B each
- 26-socket
DVI-D Molex connector as DVI input
- DB15
connector (HD DSUB) for analog RGB input (analog
VGA standard connector)
- DB9
connector (DSUB) for Remote Control functions:
Remote-OSD and Firmware updates using the RS232
port
- Front
side placed OSD keypad and Power On/Off key
- From
de full milled aluminum housing
- Housing
finish color: black, RAL 9005
- VESA-100
mounting (4x M4x8 thread
holes), additional M4x8 thread holes at the rear upper and
bottom side (8x)
- 3
mm anti-reflection mineral glass pane or 3 mm
touch screen sensor pane
- Mechanically
protected connectors area
- AC-Power
input: external 90 to 264 VAC 50/60 Hz universal
power supply with 12 VDC output voltage
- Dimensions:
449 (W) x 379 (H) x 97 (D) [mm]
- Weight: ~
11.5 kg
- Conformities:
IP42, EN55011 Class A, FCC Class A, EN50081-1,
EN50082-2, EN61000-4, external power supply:
UL1950 / EN60950 AM1, AM2, AM3
Product
Options:
- Active RGB
output, RGB loop through
- DC-power
input: integrated DC-DC converter with 24 VDC (18
to 36 VDC) or 48 VDC (36 to 72 VDC) input voltage
(-DC24 or -DC48), factory mounted
option
- Analog
resistive 5-wire Touch Screen (-T), factory mounted
option
- All around IP65
/ NEMA4 option (-65)
- One and two
axis VESA-100 stands
Connectors:
| |
DC
Power Input |
4-pins Binder 680 series DC
connector with filter and screw-lock, 2x 12 VDC,
2x Ground |
| |
DVI Interface |
26-socket MOLEX connector,
differential PanelLink standard signals; end unit |
| |
Analog RGB
Interface |
15-pins HD
DSUB connector, 2 meter data cable length, HSync.
/ VSync.: TTL signal level; RGB signals: 700 mV
p/p, 75 ohm asym. |
| |
Remote
OSD Control |
9-pins DSUB
connector, TxD and RxD V24 / RS-232 signals |
| |
Touch
Screen Option |
9-pins DSUB
connector (female), TxD, RxD, RTS and CTS, V24 /
RS-232 Signals, 2.5 meter data connection cable |
|
|
Datasheets Download: