GEMELUS 150-DM two axis tripod panel monitors  
   
 
   
   
  Stand-alone Data / Video Monitor
  . . . 15.0" color TFT flat panel
  . . . 1024 x 768 pixels (XGA)
  . . . DVI and analog RGB inputs
  . . . CVBS and S-Video inputs
  . . . Touch Screen option
 
   
Specifications:
  • 380 mm (15") XGA Data and Video Display
  • Display area: 304.1 mm (H) x 228.1 mm (V)
  • Aspect ratio: 4:3 (Landscape format)
  • Drive system: a-Si TFT active matrix
  • Display color: 16.2 million colors, 256 gray values
  • Pixel: 1024 (H) x 768 (V)
  • Pixel arrangement: RGB (Red dot, Green dot, Blue dot) vertical stripe
  • Dot pitch : 0.099 mm (H) x 0.297 mm (V)
  • Pixel pitch: 0.297 mm (H) x 0.297 mm (V)    
  • Contrast ratio: 400:1 (typ.)
  • Designed viewing direction: 85° Right, Left, Up and Down side (typ.)
  • Response time: Ton + Toff (10% - 90% - 10%) 25 ms (typ.)
  • Luminance: 250 cd/m2 at maximum IBL drive (typ.)
  • BayView AVD6 DVI / analog RGB / Video to 24-bit LVDS converter board
  • Analog RGB input: 162.5 MHz bandwidth, up to 100 kHz H-frequency, up to 200 Hz V-frequency (UXGA 60 Hz), H-sync.(+/-), V-sync. (+/-), Composite sync. on (G)reen and H-sync.
  • Standard CVBS (Composite) and S-Video (Y/C) video inputs
  • NTSC-M/N/4.43, PAL-M/N/B/G/H/I/D/K/L and SECAM formats with auto-detection logic
  • Picture position, phase and size recognition with automatic self-adjustment capabilities (auto-phase / auto-tracking)
  • Auto-scaling to maximum panel resolution (VGA, SVGA, SXGA, UXGA, PAL, SECAM up- / down-scaling to 1024 x 768 pixels)
  • On-Screen-Display (OSD) for user specific adjustments, like: intensity, contrast, color, backlight brightness, etc.
  • Setup parameters are saved in non-volatile memory
  • Gamma correction tables, 8x8 bit for R, G and B each
  • High performance de-interlacer for interlace to non-interlace movement artifacts suppression
  • 26-socket DVI-I Molex connector as DVI or analog RGB input
  • 3x BNC connectors, configurable as follows: 3x CVBS, or 1x S-Video + 1x CVBS
  • DB9 connector (DSUB) for Remote Control functions: Remote-OSD and Firmware updates using the RS232 port
  • Rear side placed OSD keypad
  • External Backlight Brightness adjustment
  • From de full milled aluminum housing
  • Housing finish color: silver metallic
  • 3 mm anti-reflection mineral glass pane or 3 mm touch screen sensor pane
  • Desk and wall mounting capabilities (Ø60 mm mounting hole)
  • No visible data and power cables
  • Positioning adjustments: +110°/-90° tilt, +/- 170° swivel
  • AC-Power input: external 90 to 264 VAC 50/60 Hz universal power supply with 12 VDC output voltage (-AC)
  • Dimensions: 630 (w) x 490 (h) x 60 (d) [mm]
  • Weight: ~ 5 kg
  • Conformities: IP42, EN55011 Class B, FCC Class B, EN50081-1, EN50082-2, EN61000-4, external power supply: UL1950 / EN60950 AM1, AM2, AM3

Product alternatives and Options:

  • Analog resistive touch screen (-T)
  • DC-Power input: +/- 5% regulated 12 VDC power source (-DC12)
  • ø 159 mm wall mounting adapter plate option
  • standard and customer specific stands and arms

Connectors:

  DC Power Input 2 meter power connection cable with 4-pins Binder 680 type DC connector with screw-lock, 2x 12 VDC, 2x Ground
  DVI / analog RGB Interfaces 2 meter data connection cable with DVI-I type Molex standard connector
  Analog RGB Interface 2 meter data connection cable with 15-pins HD DSUB connector, HSync. / VSync.: TTL signal level; RGB signals: 700 mV p/p, 75 ohm asym.
  Video Inputs 20 cm coaxial cables with 3x BNC Connectors, 3x CVBS (Composite) or 1x CVBS + 1x S-Video (Y/C) configurable video inputs
  Remote OSD Control 2 meter data connection cable with 9-pins DSUB connector (female), TxD and RxD V24 / RS-232 signals
  Touch Screen Interface 2 meter data connection cable with 9-pins DSUB connector (female), TxD, RxD, RTS and CTS, V24 / RS-232 signals
 
   

 
   
   
Standard GEMELUS 150-DM Monitors:  
   
Order # Product Name Mnemonics
21-630-00-09 GEMELUS 150-DM-AC
-DM = DVI, analog RGB and Video inputs
-AC = with external power supply
-DC12 = regulated 12 VDC power input (without power supply) 
-T = Touch Screen
Housing finish colors:
xx-xxx-xx-09 = silver metallic
21-631-00-09 GEMELUS 150-DM-T
21-632-00-09 GEMELUS 150-DM-DC12
21-633-00-09 GEMELUS 150-DVI-DC12-T
     
Order # Product Name Remarks
21-020-90-09 GE 150 Wall Mounting Plate silver metallic
 
   
   
Datasheets Download:  
   
GEMELUS 150-DM  
   
   
Baytek reserves the right to modify the information contained herein as necessary and the customer should ensure that it has the most recent revision of the data sheet. Baytek makes no warranty for the use of its products and bears no responsibility for any errors which may appear in this document.  
   
ALL RIGHTS RESERVED  
   
Last update: 03-03-11  
© 1996 - 2011, Baytek Industriesysteme GmbH, Germany  
   
E-Mail: sales@baytek.de  
   
 
   
[Tech. Update] [Trademarks] [DeskView] [PgUp] [Overview]
 
   
Webmaster: heinrich.p@baytek.de